These remnants of PVC may be ordered most of stationery and drawing. Many items that cost in a shop can be made by ourselves with very little money. Practical for every day made with the leftovers of tubes. Many of these surplus tubes that end in the garbage, we can serve very original buildings. Not only but also with PVC Perspex (methyl) can be handled very well. Perhaps these suggestions will discover new objects and possibilities of using the leftovers of tubes.
Using two flat pieces of plastic pipe that is suspended to save newspapers or magazines, maps and so on. It is not very hard to find PVC pipes, can also be purchased by the meter or balances or any hardware related. PVC material is easily glued using tail properly and do not know if we can recommend any shop or hardware related. In contrast, the methyl a special glue if needed. Nor is it easy to glue tubes or sheets of material from ABC or polypropylene. But we can also advise us on the branch stores. And in another case the latter two materials are combined with mechanical systems (rivets, screws, etc.). Also, the tape can be used in any case. Thermoplastic materials used in these adhesives based cianocrilato.
Similar to an organ, this set of pipes will allow us to keep on hand utensils, desk accessories, etc.. Scissors and can openers are suspended in some hoops.
We can use the miter box to cut the bias most of the small diameter tubes. It is not necessary to use special saws. Enough wood.
To cut a long tube to be settling well in a miter box or similar device. We must not compress diametrically as it will be difficult sawing normal.
To make a normal court we can use to wrap a cardboard tube as a template. Be careful that the edges are perfectly flush.
Most of the plastic tubes can be glued, with the exception of ABS and polypropylene, which is better for them mechanically (screws, rivets, etc.).
Two plastic surfaces not overly adhesive stickers can be joined with two sides and with smaller chunks to avoid over-application.
Surfaces that come together and support heavy loads or resistance is preferable mechanical joining with gluing, such as blind rivets, screw, etc..
Using two flat pieces of plastic pipe that is suspended to save newspapers or magazines, maps and so on. It is not very hard to find PVC pipes, can also be purchased by the meter or balances or any hardware related. PVC material is easily glued using tail properly and do not know if we can recommend any shop or hardware related. In contrast, the methyl a special glue if needed. Nor is it easy to glue tubes or sheets of material from ABC or polypropylene. But we can also advise us on the branch stores. And in another case the latter two materials are combined with mechanical systems (rivets, screws, etc.). Also, the tape can be used in any case. Thermoplastic materials used in these adhesives based cianocrilato.
Similar to an organ, this set of pipes will allow us to keep on hand utensils, desk accessories, etc.. Scissors and can openers are suspended in some hoops.
We can use the miter box to cut the bias most of the small diameter tubes. It is not necessary to use special saws. Enough wood.
To cut a long tube to be settling well in a miter box or similar device. We must not compress diametrically as it will be difficult sawing normal.
To make a normal court we can use to wrap a cardboard tube as a template. Be careful that the edges are perfectly flush.
Most of the plastic tubes can be glued, with the exception of ABS and polypropylene, which is better for them mechanically (screws, rivets, etc.).
Two plastic surfaces not overly adhesive stickers can be joined with two sides and with smaller chunks to avoid over-application.
Surfaces that come together and support heavy loads or resistance is preferable mechanical joining with gluing, such as blind rivets, screw, etc..
Entradas
No hay comentarios:
Publicar un comentario